Your Cart
Menu
  • CTT Tuning
    EFILIVE
    • CUMMINS
      • 2006-2009 Cummins
      • 2010-2018 Cummins
      • 2019 + Cummins
      DURAMAX
      • 2001-2005 Duramax
      • 2006-2010 Duramax
      • 2011-2016 Duramax
      • L5P Duramax
    EZLYNK
    • CUMMINS
      • 2010-2019 Cummins
      POWERSTROKE
      • 2011+ Powerstroke
      DURAMAX
      • 20011-2016 Duramax
    MM3
    • CUMMINS
      • Blank MM3
  • CUMMINS
    1998.5-2002
    • 1998.5-2002
      • Chips - Tuners - Electronics
      • Cooling System
      • Gauges
      • Exhaust System|Tips
      • Fuel System
      • Air Intakes|Intercoolers
    2003-2004 5.9L
      • Air filters & Cleaning Kits
      • CTT Tuning
      • Chips - Tuners - Electronics
      • Cooling System
      • Gauges
      • Exhaust System - Tips
      • Fuel System
      • Air Intakes - Intercoolers
      • Turbos
      • Water Meth
    2004.5-2007
    • 2004.5-2007 5.9L
      • Air filters & Cleaning Kits
      • Chips - Tuners - Electronics
      • Cooling System
      • Gauges
      • Exhaust System - Tips
      • Air Intakes - Intercoolers
      • Turbos
      • Water Meth
    2007.5-2009 6.7L
      • Turbos
      • Air filters & Cleaning Kits
      • Chips - Tuners - Electronics
      • Cooling System
      • Exhaust System & Tips
      • Fuel System
      • Air intakes & Intercoolers
      • Turbos
      • Water Meth
    2010 - 2012 6.7L
      • Air filters & Cleaning Kits
      • Chips - Tuners - Electronics
      • Cooling System
      • Exhaust System & Tips
      • Fuel System
      • Air intakes & Intercoolers
      • Turbos
      • Water Meth
    2013 & up 6.7L
      • Air filters & Cleaning Kits
      • Cooling System
      • Chips - Tuners - Electronics
      • Exhaust System & Tips
      • Fuel System
      • Intakes & Intercoolers
      • Turbos
      • Transmission
  • POWERSTROKE
    1993-2003 7.3L
    • 1993-2003 7.3L
      • Air filters & Cleaning Kits
      • Chips - Tuners - Electronics
      • Cooling System
      • Exhaust System & Tips
      • Fuel System
      • Air intakes & Intercoolers
      • Turbos
      • Transmission
    2003-2007 6.0L
    • 2003-2007 6.0L
      • Air filters & Cleaning Kits
      • Chips - Tuners - Electronics
      • Cooling System
      • Exhaust System & Tips
      • Fuel System
      • Air intakes & Intercoolers
      • Turbos
      • Transmission
    2008-2010 6.4L
    • 2008-2010 6.4L
      • Air filters & Cleaning Kits
      • Cooling System
      • Chips - Tuners - Electronics
      • Exhaust System & Tips
      • Fuel System
      • Turbos
      • intakes & Intercoolers
      • Transmission
    2011-2016 6.7L
      • Air filters & Cleaning Kits
      • Chips - Tuners - Electronics
      • Cooling System
      • Engine Parts
      • Exhaust System & Tips
      • Fuel System
      • Intakes & Intercoolers
      • Turbos
      • Transmission
    2017 & up 6.7L
    • 2017 & up 6.7L
      • Air filters & Cleaning Kits
      • Cooling System
      • Chips - Tuners - Electronics
      • Engine Parts
      • Exhaust System & Tips
      • Fuel System
      • Intakes & Intercoolers
      • Turbos
      • Transmission
  • DURAMAX
    2001-2004 6.6L LB7
    • 2001-2004 6.6L LB7
      • Air filters & Cleaning Kits
      • Chips - Tuners - Electronics
      • Cooling System
      • Engine Parts
      • Exhaust System & Tips
      • Fuel System
      • Intakes & Intercoolers
      • Turbos
      • Transmission
    2004.5-2005 6.6L LLY
    • 2004.5-2005 6.6L LLY
      • Air filters & Cleaning Kits
      • Chips - Tuners - Electronics
      • Cooling System
      • Engine Parts
      • Exhaust System & Tips
      • Fuel System
      • Intakes & Intercoolers
      • Turbos
      • Transmission
    2006-2007 6.6L LLY/LBZ
    • 2006-2007 6.6L LLY/LBZ
    2007.5-2010 6.6L LMM
    • 2007.5-2010 6.6L LMM
      • Air filters & Cleaning Kits
      • Chips - Tuners - Electronics
      • Cooling System
      • Engine Parts
      • Exhaust System & Tips
      • Fuel System
      • Intakes & Intercoolers
      • Turbos
      • Transmission
    2011-2016 6.6L LML
    • 2011-2016 6.6L LML
    2017-2019 6.6L L5P
    • 2017-2019 6.6L L5P
  • Shop by Brand
    Shop by brand
    • aFe
    • Banks Power
    • BD Diesel
    • Diamond Eye
    • Edge
    • FASS
    • Fleece Performance
    • MBRP
    .
    • No Limit
    • Rigid
    • Sinister
    • Snow Performance
  • Apparel
  • Hello. Sign in | Register
Destructive Diesel Performance LLC
    Customer Service: 970-817-4993
    • Shopping Cart 0
    Menu
    Destructive Diesel Performance LLC
    Destructive Diesel Performance LLC
    0
    • CTT Tuning
      • EFILIVE
      • EZLYNK
      • MM3
      CUMMINS
      • 2006-2009 Cummins
      • 2010-2018 Cummins
      • 2019 + Cummins
      DURAMAX
      • 2001-2005 Duramax
      • 2006-2010 Duramax
      • 2011-2016 Duramax
      • L5P Duramax
      CUMMINS
      • 2010-2019 Cummins
      POWERSTROKE
      • 2011+ Powerstroke
      DURAMAX
      • 20011-2016 Duramax
      CUMMINS
      • Blank MM3
    • CUMMINS
      • 1998.5-2002
      • 2003-2004 5.9L
      • 2004.5-2007
      • 2007.5-2009 6.7L
      • 2010 - 2012 6.7L
      • 2013 & up 6.7L
      1998.5-2002
      • Chips - Tuners - Electronics
      • Cooling System
      • Gauges
      • Exhaust System|Tips
      • Fuel System
      • Air Intakes|Intercoolers
      • Air filters & Cleaning Kits
      • CTT Tuning
      • Chips - Tuners - Electronics
      • Cooling System
      • Gauges
      • Exhaust System - Tips
      • Fuel System
      • Air Intakes - Intercoolers
      • Turbos
      • Water Meth
      2004.5-2007 5.9L
      • Air filters & Cleaning Kits
      • Chips - Tuners - Electronics
      • Cooling System
      • Gauges
      • Exhaust System - Tips
      • Air Intakes - Intercoolers
      • Turbos
      • Water Meth
      • Turbos
      • Air filters & Cleaning Kits
      • Chips - Tuners - Electronics
      • Cooling System
      • Exhaust System & Tips
      • Fuel System
      • Air intakes & Intercoolers
      • Turbos
      • Water Meth
      • Air filters & Cleaning Kits
      • Chips - Tuners - Electronics
      • Cooling System
      • Exhaust System & Tips
      • Fuel System
      • Air intakes & Intercoolers
      • Turbos
      • Water Meth
      • Air filters & Cleaning Kits
      • Cooling System
      • Chips - Tuners - Electronics
      • Exhaust System & Tips
      • Fuel System
      • Intakes & Intercoolers
      • Turbos
      • Transmission
    • POWERSTROKE
      • 1993-2003 7.3L
      • 2003-2007 6.0L
      • 2008-2010 6.4L
      • 2011-2016 6.7L
      • 2017 & up 6.7L
      1993-2003 7.3L
      • Air filters & Cleaning Kits
      • Chips - Tuners - Electronics
      • Cooling System
      • Exhaust System & Tips
      • Fuel System
      • Air intakes & Intercoolers
      • Turbos
      • Transmission
      2003-2007 6.0L
      • Air filters & Cleaning Kits
      • Chips - Tuners - Electronics
      • Cooling System
      • Exhaust System & Tips
      • Fuel System
      • Air intakes & Intercoolers
      • Turbos
      • Transmission
      2008-2010 6.4L
      • Air filters & Cleaning Kits
      • Cooling System
      • Chips - Tuners - Electronics
      • Exhaust System & Tips
      • Fuel System
      • Turbos
      • intakes & Intercoolers
      • Transmission
      • Air filters & Cleaning Kits
      • Chips - Tuners - Electronics
      • Cooling System
      • Engine Parts
      • Exhaust System & Tips
      • Fuel System
      • Intakes & Intercoolers
      • Turbos
      • Transmission
      2017 & up 6.7L
      • Air filters & Cleaning Kits
      • Cooling System
      • Chips - Tuners - Electronics
      • Engine Parts
      • Exhaust System & Tips
      • Fuel System
      • Intakes & Intercoolers
      • Turbos
      • Transmission
    • DURAMAX
      • 2001-2004 6.6L LB7
      • 2004.5-2005 6.6L LLY
      • 2006-2007 6.6L LLY/LBZ
      • 2007.5-2010 6.6L LMM
      • 2011-2016 6.6L LML
      • 2017-2019 6.6L L5P
      2001-2004 6.6L LB7
      • Air filters & Cleaning Kits
      • Chips - Tuners - Electronics
      • Cooling System
      • Engine Parts
      • Exhaust System & Tips
      • Fuel System
      • Intakes & Intercoolers
      • Turbos
      • Transmission
      2004.5-2005 6.6L LLY
      • Air filters & Cleaning Kits
      • Chips - Tuners - Electronics
      • Cooling System
      • Engine Parts
      • Exhaust System & Tips
      • Fuel System
      • Intakes & Intercoolers
      • Turbos
      • Transmission
      2006-2007 6.6L LLY/LBZ
      2007.5-2010 6.6L LMM
      • Air filters & Cleaning Kits
      • Chips - Tuners - Electronics
      • Cooling System
      • Engine Parts
      • Exhaust System & Tips
      • Fuel System
      • Intakes & Intercoolers
      • Turbos
      • Transmission
      2011-2016 6.6L LML
      2017-2019 6.6L L5P
    • Shop by Brand
      Shop by brand
      • aFe
      • Banks Power
      • BD Diesel
      • Diamond Eye
      • Edge
      • FASS
      • Fleece Performance
      • MBRP
      .
      • No Limit
      • Rigid
      • Sinister
      • Snow Performance
    • Apparel
    • Destructive Diesel Performance LLCHome
    • Dodge 03-04 Exhaust System & Tips
    • Dodge 03-04 Exhaust System & Tips

    Dodge 03-04 Exhaust System & Tips

    All 19 results
    • Name, A-Z
    • Name, Z-A
    • Featured
    • Price, Low To High
    • Price, High To Low
    • Date, Old To New
    • Date, New To Old
    • Best Selling
    View
    Filter
    {"id":572589178943,"title":"MBRP M1004S Polished 30\" Quiet Tone Muffler - Universal","handle":"mbrp-m1004s-polished-30-quiet-tone-muffler-universal","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eDual core technology provides optimal flow in conjunction with superior sound suppression. Perfect for on-road towing applications as cab noise is greatly reduced. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e","published_at":"2018-03-26T12:33:03-06:00","created_at":"2018-03-26T12:34:24-06:00","vendor":"Mbrp","type":"","tags":["mbrp"],"price":19999,"price_min":19999,"price_max":19999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":7112355217471,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"M1004S","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"MBRP M1004S Polished 30\" Quiet Tone Muffler - Universal","public_title":null,"options":["Default Title"],"price":19999,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/M1004S.jpg?v=1522089266"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/M1004S.jpg?v=1522089266","options":["Title"],"media":[{"alt":null,"id":2877643128895,"position":1,"preview_image":{"aspect_ratio":1.0,"height":300,"width":300,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/M1004S.jpg?v=1522089266"},"aspect_ratio":1.0,"height":300,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/M1004S.jpg?v=1522089266","width":300}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eDual core technology provides optimal flow in conjunction with superior sound suppression. Perfect for on-road towing applications as cab noise is greatly reduced. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e"}
    MBRP M1004S Polished 30" Quiet Tone Muffler - Universal
    Mbrp
    MBRP M1004S Polished 30" Quiet Tone Muffler - Universal
    $199.99
    {"id":610927902783,"title":"ATS 2049202272 Pulse Flow Exhaust Manifold 03-07 Cummins","handle":"ats-2049202272-pulse-flow-exhaust-manifold-03-07-cummins","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eATS Pulseflow Exhaust Manifolds flow better than OEM units and eliminate cracking and flexing issues. Constant heat cycles, age and performance parts can stress a stock manifold, leading to exhaust leaks, lower boost pressure and poor performance. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA\u003c\/span\u003e\u003cspan\u003eTS exhaust manifolds for 1994-2012 Dodge trucks can handle higher temperatures, more heat cycles and help the turbo spool faster. They are all conveniently tapped for an EGT probe – so no drilling or tapping is required. \u003c\/span\u003e\u003c\/p\u003e","published_at":"2018-04-09T10:54:39-06:00","created_at":"2018-04-09T10:56:00-06:00","vendor":"ATS","type":"","tags":[],"price":47025,"price_min":47025,"price_max":47025,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":7275790565439,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2049202272","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"ATS 2049202272 Pulse Flow Exhaust Manifold 03-07 Cummins","public_title":null,"options":["Default Title"],"price":47025,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/0c8b3028-62a7-4c62-a3e9-a53b937ea99a-420.jpg?v=1523292962"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/0c8b3028-62a7-4c62-a3e9-a53b937ea99a-420.jpg?v=1523292962","options":["Title"],"media":[{"alt":null,"id":2912086491199,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/0c8b3028-62a7-4c62-a3e9-a53b937ea99a-420.jpg?v=1523292962"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/0c8b3028-62a7-4c62-a3e9-a53b937ea99a-420.jpg?v=1523292962","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eATS Pulseflow Exhaust Manifolds flow better than OEM units and eliminate cracking and flexing issues. Constant heat cycles, age and performance parts can stress a stock manifold, leading to exhaust leaks, lower boost pressure and poor performance. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA\u003c\/span\u003e\u003cspan\u003eTS exhaust manifolds for 1994-2012 Dodge trucks can handle higher temperatures, more heat cycles and help the turbo spool faster. They are all conveniently tapped for an EGT probe – so no drilling or tapping is required. \u003c\/span\u003e\u003c\/p\u003e"}
    ATS 2049202272 Pulse Flow Exhaust Manifold 03-07 Cummins
    ATS
    ATS 2049202272 Pulse Flow Exhaust Manifold 03-07 Cummins
    $470.25
    {"id":610942484543,"title":"Diamond Eye VC400HX40 Exhaust Clamps V-Band - Universal","handle":"diamond-eye-vc400hx40-exhaust-clamps-v-band-universal","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eV-BAND Clamps\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- 4in \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e-FITS HX40 PIPE\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDiamond Eye Manufacturing is recognized as being one of the most modern and progressive companies in eastern Oregon. The company has invested heavily to incorporate several CNC mandrel bending machines and support equipment, Enabling us to produce the finest exhaust components in today's marketplace. Mandrel bending and fabrication parameters are extensive, and a variety of tooling allows us to offer tube processing from 3\/8\" to 5\"OD in both aluminized and stainless steel. Diamond Eye Manufacturing is located on a 23-acre complex and has immediate plans for expansion. Currently, the company utilizes over 60,000 sq. ft. for manufacturing components. Separate from the manufacturing facility, our Warehouse Distribution Center utilizes highly efficient shipping methods and a substantial amount of inventory to ensure rapid response times for delivering customer orders in a timely fashion. Our new state of the art Research and Development Center was established to keep pace with the ever changing automotive performance aftermarket. We have taken great care to outfit the facility with an array of testing equipment to provide our engineers with the information needed to design the best systems available. Many of the employees here at Diamond Eye Manufacturing have several years of experience within the industry. This wealth of knowledge and experience is tapped and transformed into results. Our promise to you is simply this, we will provide you with the highest level of customer service, quality parts, and best prices available to keep you competitive!\u003c\/span\u003e\u003c\/p\u003e","published_at":"2018-04-09T11:00:40-06:00","created_at":"2018-04-09T11:02:20-06:00","vendor":"Diamone Eye","type":"","tags":[],"price":3684,"price_min":3684,"price_max":3684,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":7275838701631,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"VC400HX40","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Diamond Eye VC400HX40 Exhaust Clamps V-Band - Universal","public_title":null,"options":["Default Title"],"price":3684,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/32310331d3a710cc0d49df14c446c3ef.JPG?v=1523293342"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/32310331d3a710cc0d49df14c446c3ef.JPG?v=1523293342","options":["Title"],"media":[{"alt":null,"id":2912094126143,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/32310331d3a710cc0d49df14c446c3ef.JPG?v=1523293342"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/32310331d3a710cc0d49df14c446c3ef.JPG?v=1523293342","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eV-BAND Clamps\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- 4in \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e-FITS HX40 PIPE\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDiamond Eye Manufacturing is recognized as being one of the most modern and progressive companies in eastern Oregon. The company has invested heavily to incorporate several CNC mandrel bending machines and support equipment, Enabling us to produce the finest exhaust components in today's marketplace. Mandrel bending and fabrication parameters are extensive, and a variety of tooling allows us to offer tube processing from 3\/8\" to 5\"OD in both aluminized and stainless steel. Diamond Eye Manufacturing is located on a 23-acre complex and has immediate plans for expansion. Currently, the company utilizes over 60,000 sq. ft. for manufacturing components. Separate from the manufacturing facility, our Warehouse Distribution Center utilizes highly efficient shipping methods and a substantial amount of inventory to ensure rapid response times for delivering customer orders in a timely fashion. Our new state of the art Research and Development Center was established to keep pace with the ever changing automotive performance aftermarket. We have taken great care to outfit the facility with an array of testing equipment to provide our engineers with the information needed to design the best systems available. Many of the employees here at Diamond Eye Manufacturing have several years of experience within the industry. This wealth of knowledge and experience is tapped and transformed into results. Our promise to you is simply this, we will provide you with the highest level of customer service, quality parts, and best prices available to keep you competitive!\u003c\/span\u003e\u003c\/p\u003e"}
    Diamond Eye VC400HX40 Exhaust Clamps V-Band - Universal
    Diamone Eye
    Diamond Eye VC400HX40 Exhaust Clamps V-Band - Universal
    $36.84
    {"id":572634955839,"title":"Diamond Eye 5612BAC-DE Polished 5\" Exhaust Tip - Universal","handle":"diamond-eye-5612bac-de-polished-5-exhaust-tip-universal","description":"","published_at":"2018-03-26T13:29:25-06:00","created_at":"2018-03-26T13:32:38-06:00","vendor":"Diamone Eye","type":"","tags":["Exhaust Tip"],"price":7223,"price_min":7223,"price_max":7223,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":7112664318015,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"5612BAC-DE","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Diamond Eye 5612BAC-DE Polished 5\" Exhaust Tip - Universal","public_title":null,"options":["Default Title"],"price":7223,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/jgfhdgsf.jpg?v=1522092760"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/jgfhdgsf.jpg?v=1522092760","options":["Title"],"media":[{"alt":null,"id":2877751656511,"position":1,"preview_image":{"aspect_ratio":1.246,"height":228,"width":284,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/jgfhdgsf.jpg?v=1522092760"},"aspect_ratio":1.246,"height":228,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/jgfhdgsf.jpg?v=1522092760","width":284}],"requires_selling_plan":false,"selling_plan_groups":[],"content":""}
    Diamond Eye 5612BAC-DE Polished 5" Exhaust Tip - Universal
    Diamone Eye
    Diamond Eye 5612BAC-DE Polished 5" Exhaust Tip - Universal
    $72.23
    {"id":572595372095,"title":"MBRP MDS930 Stainless 4\" Muffler Delete Pipe - Universal","handle":"mbrp-mds930-stainless-4-muffler-delete-pipe-universal","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e4\" Single System Muffler Delete Pipe\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e30\" Length\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eUniversal Fit\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThere are always those purists who push the envelope in their pursuit of maximum performance. It is for these true enthusiasts that we build what is one of the most extensive line-ups of muffler deletes in the industry. Extreme performance and extreme sound can be yours.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eConstructed from T409 stainless steel this muffler delete will fit all 4\" exhaust systems and last as long as you own your truck.\u003c\/span\u003e","published_at":"2018-03-26T12:44:04-06:00","created_at":"2018-03-26T12:45:21-06:00","vendor":"Mbrp","type":"","tags":["mbrp"],"price":7999,"price_min":7999,"price_max":7999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":7112416067647,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MDS930","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"MBRP MDS930 Stainless 4\" Muffler Delete Pipe - Universal","public_title":null,"options":["Default Title"],"price":7999,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/MDS930.jpg?v=1522089923"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/MDS930.jpg?v=1522089923","options":["Title"],"media":[{"alt":null,"id":2877659676735,"position":1,"preview_image":{"aspect_ratio":1.0,"height":300,"width":300,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/MDS930.jpg?v=1522089923"},"aspect_ratio":1.0,"height":300,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/MDS930.jpg?v=1522089923","width":300}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e4\" Single System Muffler Delete Pipe\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e30\" Length\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eUniversal Fit\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThere are always those purists who push the envelope in their pursuit of maximum performance. It is for these true enthusiasts that we build what is one of the most extensive line-ups of muffler deletes in the industry. Extreme performance and extreme sound can be yours.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eConstructed from T409 stainless steel this muffler delete will fit all 4\" exhaust systems and last as long as you own your truck.\u003c\/span\u003e"}
    MBRP MDS930 Stainless 4" Muffler Delete Pipe - Universal
    Mbrp
    MBRP MDS930 Stainless 4" Muffler Delete Pipe - Universal
    $79.99
    {"id":572591865919,"title":"MBRP B1610BLK Single Stack 6\" Angle Cut 36\" (Black Coated) - Universal","handle":"mbrp-b1610blk-single-stack-6-angle-cut-36-black-coated-universal","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e6\" Angle Cut, 36\" Length\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBlack Series (1 pc)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eGive your truck the diesel drag racer's edge with our Black Series heavy gauge aluminized steel stacks. These compact length 6\" angle cut pipes give your pick-up a real streamlined look. Precision cut for a perfect fit and coated in our high heat black finish, nothing shows off the power and performance of your ride better. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eFits all 4\" SMOKERS™ systems. \u003c\/span\u003e","published_at":"2018-03-26T12:38:06-06:00","created_at":"2018-03-26T12:39:19-06:00","vendor":"Mbrp","type":"","tags":["mbrp"],"price":17499,"price_min":17499,"price_max":17499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":7112373731391,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"discontinue","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"MBRP B1610BLK Single Stack 6\" Angle Cut 36\" (Black Coated) - Universal","public_title":null,"options":["Default Title"],"price":17499,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/B1610BLK.jpg?v=1522089561"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/B1610BLK.jpg?v=1522089561","options":["Title"],"media":[{"alt":null,"id":2877648371775,"position":1,"preview_image":{"aspect_ratio":1.0,"height":300,"width":300,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/B1610BLK.jpg?v=1522089561"},"aspect_ratio":1.0,"height":300,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/B1610BLK.jpg?v=1522089561","width":300}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e6\" Angle Cut, 36\" Length\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBlack Series (1 pc)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eGive your truck the diesel drag racer's edge with our Black Series heavy gauge aluminized steel stacks. These compact length 6\" angle cut pipes give your pick-up a real streamlined look. Precision cut for a perfect fit and coated in our high heat black finish, nothing shows off the power and performance of your ride better. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eFits all 4\" SMOKERS™ systems. \u003c\/span\u003e"}
    MBRP B1610BLK Single Stack 6" Angle Cut 36" (Black Coated) - Universal
    Mbrp
    MBRP B1610BLK Single Stack 6" Angle Cut 36" (Black Coated) - Universal
    $174.99
    {"id":572584099903,"title":"Deviant 86601 Exhaust Manifold Installation Bolt Kit - Cummins (ALL)","handle":"deviant-86601-exhaust-manifold-installation-bolt-kit-cummins-all","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eAllen Head Bolt Kit for All L6 Cummins Aftermarket Exhaust Manifolds.  Will need spacers for OEM manifolds.\u003c\/span\u003e","published_at":"2018-03-26T12:24:57-06:00","created_at":"2018-03-26T12:26:11-06:00","vendor":"FloPro","type":"","tags":[],"price":2249,"price_min":2249,"price_max":2249,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":7112289288255,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"86601","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Deviant 86601 Exhaust Manifold Installation Bolt Kit - Cummins (ALL)","public_title":null,"options":["Default Title"],"price":2249,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/86601-2.jpg?v=1522088772"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/86601-2.jpg?v=1522088772","options":["Title"],"media":[{"alt":null,"id":2877634019391,"position":1,"preview_image":{"aspect_ratio":1.497,"height":334,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/86601-2.jpg?v=1522088772"},"aspect_ratio":1.497,"height":334,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/86601-2.jpg?v=1522088772","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eAllen Head Bolt Kit for All L6 Cummins Aftermarket Exhaust Manifolds.  Will need spacers for OEM manifolds.\u003c\/span\u003e"}
    Deviant 86601 Exhaust Manifold Installation Bolt Kit - Cummins (ALL)
    FloPro
    Deviant 86601 Exhaust Manifold Installation Bolt Kit - Cummins (ALL)
    $22.49
    {"id":611134734399,"title":"aFe 46-40011 BladeRunner Stainless Steel Exhaust Manifold 03-07 Cummins","handle":"afe-46-40011-bladerunner-stainless-steel-exhaust-manifold-03-07-cummins","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eEliminate the costly exhaust manifold cracks prevalent in the factory exhaust manifold. The aFe Bladerunner exhaust manifold for the popular 5.9L Dodge Ram Cummins sets the new standard. Constructed out of cast 304 stainless steel with a reinforcing rib for strength along the flange and ultra-thick wall flange at the port. The BladeRunner exhaust manifold outflowed the factory exhaust by 23% improving exhaust flow, performance and throttle response. This manifold also features 2 EGT probe ports, thick wall design for increased strength (0.25\" vs 0.15\" for the stock unit), matched ports and has a merged runner design to maximize exhaust flow. Once you install this awesome exhaust manifold, you will feel improved turbo spool up times, improved throttle response and performance.\u003c\/p\u003e\n\u003cp\u003eThis exhaust manifold is 50-state legal for 2003-2007 models (CARB E.O Number D-550-9).\u003c\/p\u003e","published_at":"2018-04-09T12:23:55-06:00","created_at":"2018-04-09T12:26:33-06:00","vendor":"AFE","type":"","tags":[],"price":64999,"price_min":64999,"price_max":64999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":7276344934463,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"46-40011","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"aFe 46-40011 BladeRunner Stainless Steel Exhaust Manifold 03-07 Cummins","public_title":null,"options":["Default Title"],"price":64999,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/46-40011a1600_1.1517011688.jpg?v=1546223608"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/46-40011a1600_1.1517011688.jpg?v=1546223608","options":["Title"],"media":[{"alt":null,"id":2912168673343,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1200,"width":1600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/46-40011a1600_1.1517011688.jpg?v=1546223608"},"aspect_ratio":1.333,"height":1200,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/46-40011a1600_1.1517011688.jpg?v=1546223608","width":1600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eEliminate the costly exhaust manifold cracks prevalent in the factory exhaust manifold. The aFe Bladerunner exhaust manifold for the popular 5.9L Dodge Ram Cummins sets the new standard. Constructed out of cast 304 stainless steel with a reinforcing rib for strength along the flange and ultra-thick wall flange at the port. The BladeRunner exhaust manifold outflowed the factory exhaust by 23% improving exhaust flow, performance and throttle response. This manifold also features 2 EGT probe ports, thick wall design for increased strength (0.25\" vs 0.15\" for the stock unit), matched ports and has a merged runner design to maximize exhaust flow. Once you install this awesome exhaust manifold, you will feel improved turbo spool up times, improved throttle response and performance.\u003c\/p\u003e\n\u003cp\u003eThis exhaust manifold is 50-state legal for 2003-2007 models (CARB E.O Number D-550-9).\u003c\/p\u003e"}
    aFe 46-40011 BladeRunner Stainless Steel Exhaust Manifold 03-07 Cummins
    AFE
    aFe 46-40011 BladeRunner Stainless Steel Exhaust Manifold 03-07 Cummins
    $649.99
    {"id":611126181951,"title":"Magnaflow 15395 Stainless 4\" Tailpipe 03-04 Cummins","handle":"magnaflow-15395-stainless-4-tailpipe-03-04-cummins","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eMagnaFlow Universal Tailpipes are available for various truck applications including Chevrolet, GMC, Dodge and Ford. Each tailpipe is made of 100% stainless steel to ensure durability and mandrel-bent to ensure maximum performance gains. Available in diameters ranging from 2.5\" to 3.5 in single exit and backed by MagnaFlow's lifetime manufacturer's warranty, these universal tailpipes are the perfect addition to your truck.\u003c\/span\u003e","published_at":"2018-04-09T12:21:39-06:00","created_at":"2018-04-09T12:23:19-06:00","vendor":"Magnaflow","type":"","tags":["magnaflow"],"price":12309,"price_min":12309,"price_max":12309,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":7276322029631,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"15395","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Magnaflow 15395 Stainless 4\" Tailpipe 03-04 Cummins","public_title":null,"options":["Default Title"],"price":12309,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/9d1400ad-ce2c-4f36-89cc-2875cfbf27f7-420.jpg?v=1546222432"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/9d1400ad-ce2c-4f36-89cc-2875cfbf27f7-420.jpg?v=1546222432","options":["Title"],"media":[{"alt":null,"id":2912164872255,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/9d1400ad-ce2c-4f36-89cc-2875cfbf27f7-420.jpg?v=1546222432"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/9d1400ad-ce2c-4f36-89cc-2875cfbf27f7-420.jpg?v=1546222432","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eMagnaFlow Universal Tailpipes are available for various truck applications including Chevrolet, GMC, Dodge and Ford. Each tailpipe is made of 100% stainless steel to ensure durability and mandrel-bent to ensure maximum performance gains. Available in diameters ranging from 2.5\" to 3.5 in single exit and backed by MagnaFlow's lifetime manufacturer's warranty, these universal tailpipes are the perfect addition to your truck.\u003c\/span\u003e"}
    Magnaflow 15395 Stainless 4" Tailpipe 03-04 Cummins
    Magnaflow
    Magnaflow 15395 Stainless 4" Tailpipe 03-04 Cummins
    $123.09
    {"id":611115499583,"title":"MBRP S61140PLM Aluminized 5\" Turbo Back Exhaust 03-04 Cummins","handle":"mbrp-s61140plm-aluminized-5-turbo-back-exhaust-03-04-cummins","description":"\u003cp\u003eNO Muffler\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eBuilt from heavy duty aluminized steel our Performance Series exhaust systems offer a value price without compromising on the quality built into every component. While the seams are a major point of rust through with some budget systems our fully sealed tubing adds years to your system. Constructed to the same specifications as our top of the line Pro Series we back this line with a 1 Year Warranty.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eBuilt to Perform\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003eYou count on your truck to handle whatever you need it to do. With MBRP performance exhaust you can make that happen with up to 18 more horsepower and 28 ft\/lb more torque not to mention lower EGTs. More pulling power, improved throttle response, greater fuel efficiency, with an MBRP diesel performance exhaust you will be amazed at what your truck can do.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eMinimize Backpressure\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003eThe secret to getting more out of your diesel engine is to give it lots of cool, clean air. The only way that you can get fresh air in is to get the hot air out. From the spiral louvered high flow muffler to the fully mandrel bent tubing to minimal bend degree angles, your MBRP performance system gets exhaust out fast. Drop exhaust gas temperature by up to 200°F and set the stage for all the performance you want. An MBRP performance exhaust system is the starting point to getting the most from cold air intakes, programmers, modules and downloaders.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eEasy Installation\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003eMBRP systems are as much fun to install as to drive with on your truck. Bolt-on, no weld design makes installation a no hassle one and a half to two hour project. Everything is direct fit to the OEM hangers and you get all the clamps and parts you will need, all in one box, no matter what configuration of truck you have.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWe're With You\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003eHere at MBRP we take \"customer service\" very personally. Need help finding the right system...finding a dealer...working through your install...we are here to help. Give us a call toll free at 888-636-7223.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSound \u0026amp; Style\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003ePerformance is one thing but at MBRP we believe that appearance and sound are just as important. Every MBRP performance exhaust system has been specifically tuned to get the optimal sound from your pickup. With our new stamped logo on the tip and our unmistakable styling, there's no question that you have the hottest performance exhaust on the road - MBRP.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBuilt from heavy-duty aluminized steel our PLM Series performance exhaust systems offer a value price without compromising on the quality built into every component. Featuring a two-piece tail wee replaced the muffler with an MBRP muffler delete pipe to provide you with the ultimate in free flow exhaust. Constructed to the same specifications as our top of the line Pro Series we back this line with a 1 Year Warranty.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eBuilt to Perform\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003eYou count on your truck to handle whatever you need it to do. With MBRP you can make that happen with the horsepower, torque and lower EGTs that only a wide open, free flowing performance exhaust system can provide. More pulling power, improved throttle response, greater fuel efficiency, with an MBRP diesel performance exhaust you will be amazed at what your truck can do.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eMinimize Backpressure\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003eThe secret to getting more out of your diesel engine is to give it lots of cool, clean air. The only way that you can get fresh air in is to get the hot air out. Thanks to MBRP muffler delete, the fully mandrel bent tubing and minimal bend degree angles, your MBRP performance system gets exhaust out fast. Drop exhaust gas temperature by up to 200°F and set the stage for all the performance you want. An MBRP performance exhaust system is the starting point to getting the most from cold air intakes, programmers, modules and downloaders.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eEasy Installation\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003eMBRP systems are as much fun to install as to drive with on your truck. Bolt-on, no weld design makes installation a no hassle one and a half to two hour project. Everything is direct fit to the OEM hangers and you get all the clamps and parts you will need, all in one box, no matter what configuration of truck you have.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2018-04-09T12:16:14-06:00","created_at":"2018-04-09T12:18:23-06:00","vendor":"Mbrp","type":"","tags":["mbrp"],"price":49999,"price_min":49999,"price_max":49999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":7276302991423,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"S61140PLM","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"MBRP S61140PLM Aluminized 5\" Turbo Back Exhaust 03-04 Cummins","public_title":null,"options":["Default Title"],"price":49999,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/baad454298577683050c18220fd8bd9b.JPG?v=1523297905"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/baad454298577683050c18220fd8bd9b.JPG?v=1523297905","options":["Title"],"media":[{"alt":null,"id":2912160710719,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/baad454298577683050c18220fd8bd9b.JPG?v=1523297905"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/baad454298577683050c18220fd8bd9b.JPG?v=1523297905","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eNO Muffler\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eBuilt from heavy duty aluminized steel our Performance Series exhaust systems offer a value price without compromising on the quality built into every component. While the seams are a major point of rust through with some budget systems our fully sealed tubing adds years to your system. Constructed to the same specifications as our top of the line Pro Series we back this line with a 1 Year Warranty.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eBuilt to Perform\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003eYou count on your truck to handle whatever you need it to do. With MBRP performance exhaust you can make that happen with up to 18 more horsepower and 28 ft\/lb more torque not to mention lower EGTs. More pulling power, improved throttle response, greater fuel efficiency, with an MBRP diesel performance exhaust you will be amazed at what your truck can do.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eMinimize Backpressure\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003eThe secret to getting more out of your diesel engine is to give it lots of cool, clean air. The only way that you can get fresh air in is to get the hot air out. From the spiral louvered high flow muffler to the fully mandrel bent tubing to minimal bend degree angles, your MBRP performance system gets exhaust out fast. Drop exhaust gas temperature by up to 200°F and set the stage for all the performance you want. An MBRP performance exhaust system is the starting point to getting the most from cold air intakes, programmers, modules and downloaders.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eEasy Installation\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003eMBRP systems are as much fun to install as to drive with on your truck. Bolt-on, no weld design makes installation a no hassle one and a half to two hour project. Everything is direct fit to the OEM hangers and you get all the clamps and parts you will need, all in one box, no matter what configuration of truck you have.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWe're With You\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003eHere at MBRP we take \"customer service\" very personally. Need help finding the right system...finding a dealer...working through your install...we are here to help. Give us a call toll free at 888-636-7223.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSound \u0026amp; Style\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003ePerformance is one thing but at MBRP we believe that appearance and sound are just as important. Every MBRP performance exhaust system has been specifically tuned to get the optimal sound from your pickup. With our new stamped logo on the tip and our unmistakable styling, there's no question that you have the hottest performance exhaust on the road - MBRP.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBuilt from heavy-duty aluminized steel our PLM Series performance exhaust systems offer a value price without compromising on the quality built into every component. Featuring a two-piece tail wee replaced the muffler with an MBRP muffler delete pipe to provide you with the ultimate in free flow exhaust. Constructed to the same specifications as our top of the line Pro Series we back this line with a 1 Year Warranty.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eBuilt to Perform\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003eYou count on your truck to handle whatever you need it to do. With MBRP you can make that happen with the horsepower, torque and lower EGTs that only a wide open, free flowing performance exhaust system can provide. More pulling power, improved throttle response, greater fuel efficiency, with an MBRP diesel performance exhaust you will be amazed at what your truck can do.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eMinimize Backpressure\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003eThe secret to getting more out of your diesel engine is to give it lots of cool, clean air. The only way that you can get fresh air in is to get the hot air out. Thanks to MBRP muffler delete, the fully mandrel bent tubing and minimal bend degree angles, your MBRP performance system gets exhaust out fast. Drop exhaust gas temperature by up to 200°F and set the stage for all the performance you want. An MBRP performance exhaust system is the starting point to getting the most from cold air intakes, programmers, modules and downloaders.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eEasy Installation\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003eMBRP systems are as much fun to install as to drive with on your truck. Bolt-on, no weld design makes installation a no hassle one and a half to two hour project. Everything is direct fit to the OEM hangers and you get all the clamps and parts you will need, all in one box, no matter what configuration of truck you have.\u003c\/span\u003e\u003c\/p\u003e"}
    MBRP S61140PLM Aluminized 5" Turbo Back Exhaust 03-04 Cummins
    Mbrp
    MBRP S61140PLM Aluminized 5" Turbo Back Exhaust 03-04 Cummins
    $499.99
    {"id":611094233151,"title":"Bd Diesel 1045995-T4 Exhaust Pulse Manifold w\/T4 Mount \/ 20-degree 98.5-17 Cummins","handle":"bd-diesel-1045995-t4-exhaust-pulse-manifold-w-t4-mount-20-degree-98-5-17-cummins","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cul\u003e\n\u003cli\u003eGaskets are available separately\u003c\/li\u003e\n\u003cli\u003eLarger runner size helps enhance flow through the manifolds\u003c\/li\u003e\n\u003cli\u003eNo restriction throughout rpm\u003c\/li\u003e\n\u003cli\u003eCast ports and runners match inlet gasket within 0.03\"\u003c\/li\u003e\n\u003cli\u003eCenter Mount can face down or up\u003c\/li\u003e\n\u003cli\u003eOptimum 20 degree flange helps mounting S400, S500 other larger turbochargers\u003c\/li\u003e\n\u003cli\u003eHeavy cast HiSi Ductile Iron retains heat energy\u003c\/li\u003e\n\u003cli\u003eHigh temperature black coated\u003c\/li\u003e\n\u003cli\u003eDrilled and tapped 1\/8-NPT ports\u003c\/li\u003e\n\u003cli\u003eThick walls allows for drilling\/tapping of individual cylinder pyro ports\u003c\/li\u003e\n\u003cli\u003eHeat expansion joints prevents cracking\u003c\/li\u003e\n\u003cli\u003eIntended for installation with competition turbos\u003c\/li\u003e\n\u003cli\u003eSome modifications to vehicle\/engine components will be necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWarranty\u003c\/h4\u003e\n\u003ch6 class=\"mb0 ml16\"\u003e\u003cstrong\u003eParts\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e36-Months\u003c\/li\u003e\n\u003cli\u003e75,000 Miles\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2018-04-09T12:08:59-06:00","created_at":"2018-04-09T12:10:51-06:00","vendor":"BD Diesel","type":"","tags":[],"price":54995,"price_min":54995,"price_max":54995,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":7276232900671,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1045995-T4","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Bd Diesel 1045995-T4 Exhaust Pulse Manifold w\/T4 Mount \/ 20-degree 98.5-17 Cummins","public_title":null,"options":["Default Title"],"price":54995,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/image_3.png?v=1546221891"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/image_3.png?v=1546221891","options":["Title"],"media":[{"alt":null,"id":2912153141311,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/image_3.png?v=1546221891"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/image_3.png?v=1546221891","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cul\u003e\n\u003cli\u003eGaskets are available separately\u003c\/li\u003e\n\u003cli\u003eLarger runner size helps enhance flow through the manifolds\u003c\/li\u003e\n\u003cli\u003eNo restriction throughout rpm\u003c\/li\u003e\n\u003cli\u003eCast ports and runners match inlet gasket within 0.03\"\u003c\/li\u003e\n\u003cli\u003eCenter Mount can face down or up\u003c\/li\u003e\n\u003cli\u003eOptimum 20 degree flange helps mounting S400, S500 other larger turbochargers\u003c\/li\u003e\n\u003cli\u003eHeavy cast HiSi Ductile Iron retains heat energy\u003c\/li\u003e\n\u003cli\u003eHigh temperature black coated\u003c\/li\u003e\n\u003cli\u003eDrilled and tapped 1\/8-NPT ports\u003c\/li\u003e\n\u003cli\u003eThick walls allows for drilling\/tapping of individual cylinder pyro ports\u003c\/li\u003e\n\u003cli\u003eHeat expansion joints prevents cracking\u003c\/li\u003e\n\u003cli\u003eIntended for installation with competition turbos\u003c\/li\u003e\n\u003cli\u003eSome modifications to vehicle\/engine components will be necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWarranty\u003c\/h4\u003e\n\u003ch6 class=\"mb0 ml16\"\u003e\u003cstrong\u003eParts\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e36-Months\u003c\/li\u003e\n\u003cli\u003e75,000 Miles\u003c\/li\u003e\n\u003c\/ul\u003e"}
    Bd Diesel 1045995-T4 Exhaust Pulse Manifold w/T4 Mount / 20-degree 98.5-17 Cummins
    BD Diesel
    Bd Diesel 1045995-T4 Exhaust Pulse Manifold w/T4 Mount / 20-degree 98.5-17 Cummins
    $549.95
    {"id":611090923583,"title":"BD Diesel 1045996-T4 Exhaust Wastegated Manifold T4 Mount 98.5-17","handle":"bd-diesel-1045996-t4-exhaust-wastegated-manifold-t4-mount-98-5-17","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cul\u003e\n\u003cli\u003eGaskets are available separately\u003c\/li\u003e\n\u003cli\u003eBetter cylinder exhaust evacuation to keep EGTs down\u003c\/li\u003e\n\u003cli\u003eCombustion Pulse remains constant with the W\/G valve closed\u003c\/li\u003e\n\u003cli\u003eMachined for use with 45mm Hyper Gate or Turbo Smart\u003c\/li\u003e\n\u003cli\u003eBlock off plate and clamp provided\u003c\/li\u003e\n\u003cli\u003eGate port area is 1.67 sq. in. - 33% of T4 \/ 12% of T6 inlet\u003c\/li\u003e\n\u003cli\u003eImproves turbo response\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWarranty\u003c\/h4\u003e\n\u003ch6 class=\"mb0 ml16\"\u003e\u003cstrong\u003eParts\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e36-Months\u003c\/li\u003e\n\u003cli\u003e75,000 Miles\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2018-04-09T12:07:08-06:00","created_at":"2018-04-09T12:08:33-06:00","vendor":"BD Diesel","type":"","tags":[],"price":54995,"price_min":54995,"price_max":54995,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":7276224380991,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1045996-T4","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"BD Diesel 1045996-T4 Exhaust Wastegated Manifold T4 Mount 98.5-17","public_title":null,"options":["Default Title"],"price":54995,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/image_2.png?v=1546221849"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/image_2.png?v=1546221849","options":["Title"],"media":[{"alt":null,"id":2912152649791,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/image_2.png?v=1546221849"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/image_2.png?v=1546221849","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cul\u003e\n\u003cli\u003eGaskets are available separately\u003c\/li\u003e\n\u003cli\u003eBetter cylinder exhaust evacuation to keep EGTs down\u003c\/li\u003e\n\u003cli\u003eCombustion Pulse remains constant with the W\/G valve closed\u003c\/li\u003e\n\u003cli\u003eMachined for use with 45mm Hyper Gate or Turbo Smart\u003c\/li\u003e\n\u003cli\u003eBlock off plate and clamp provided\u003c\/li\u003e\n\u003cli\u003eGate port area is 1.67 sq. in. - 33% of T4 \/ 12% of T6 inlet\u003c\/li\u003e\n\u003cli\u003eImproves turbo response\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWarranty\u003c\/h4\u003e\n\u003ch6 class=\"mb0 ml16\"\u003e\u003cstrong\u003eParts\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e36-Months\u003c\/li\u003e\n\u003cli\u003e75,000 Miles\u003c\/li\u003e\n\u003c\/ul\u003e"}
    BD Diesel 1045996-T4 Exhaust Wastegated Manifold T4 Mount 98.5-17
    BD Diesel
    BD Diesel 1045996-T4 Exhaust Wastegated Manifold T4 Mount 98.5-17
    $549.95
    {"id":611087220799,"title":"Diamond Eye 5618BAC Polished 5\" Exhaust tip - Universal","handle":"diamond-eye-5618bac-polished-5-exhaust-tip-universal","description":"","published_at":"2018-04-09T12:00:38-06:00","created_at":"2018-04-09T12:06:28-06:00","vendor":"Diamone Eye","type":"","tags":[],"price":11155,"price_min":11155,"price_max":11155,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":7276202098751,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"5618BAC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Diamond Eye 5618BAC Polished 5\" Exhaust tip - Universal","public_title":null,"options":["Default Title"],"price":11155,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/5511bc600c9ce39d52205d1b88af8df8_1.JPG?v=1523297191"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/5511bc600c9ce39d52205d1b88af8df8_1.JPG?v=1523297191","options":["Title"],"media":[{"alt":null,"id":2912151666751,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/5511bc600c9ce39d52205d1b88af8df8_1.JPG?v=1523297191"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/5511bc600c9ce39d52205d1b88af8df8_1.JPG?v=1523297191","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":""}
    Diamond Eye 5618BAC Polished 5" Exhaust tip - Universal
    Diamone Eye
    Diamond Eye 5618BAC Polished 5" Exhaust tip - Universal
    $111.55
    {"id":611072966719,"title":"aFe 46-40012 Bladerunner Exhaust Manifold 03-07 Cummins","handle":"afe-46-40012-bladerunner-exhaust-manifold-03-07-cummins","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch3 class=\"product-name\"\u003eaFe BLADERUNNER DUCTILE IRON EXHAUST MANIFOLD\u003c\/h3\u003e","published_at":"2018-04-09T11:56:08-06:00","created_at":"2018-04-09T11:58:16-06:00","vendor":"AFE","type":"","tags":[],"price":43999,"price_min":43999,"price_max":43999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":7276161695807,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"46-40012","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"aFe 46-40012 Bladerunner Exhaust Manifold 03-07 Cummins","public_title":null,"options":["Default Title"],"price":43999,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/d16af3225892123f9a3203c54467066a.JPG?v=1546223581"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/d16af3225892123f9a3203c54467066a.JPG?v=1546223581","options":["Title"],"media":[{"alt":null,"id":2912146686015,"position":1,"preview_image":{"aspect_ratio":1.333,"height":315,"width":420,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/d16af3225892123f9a3203c54467066a.JPG?v=1546223581"},"aspect_ratio":1.333,"height":315,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/d16af3225892123f9a3203c54467066a.JPG?v=1546223581","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch3 class=\"product-name\"\u003eaFe BLADERUNNER DUCTILE IRON EXHAUST MANIFOLD\u003c\/h3\u003e"}
    aFe 46-40012 Bladerunner Exhaust Manifold 03-07 Cummins
    AFE
    aFe 46-40012 Bladerunner Exhaust Manifold 03-07 Cummins
    $439.99
    {"id":610951331903,"title":"BD Diesel 1045987 Pulse Exhaust Manifold 03-07 Cummins","handle":"bd-diesel-1045987-pulse-exhaust-manifold-03-07-cummins","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"collapseThree\" class=\"panel-collapse collapse in\" role=\"tabpanel\" aria-labelledby=\"headingThree\" aria-expanded=\"true\"\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cul\u003e\n\u003cli\u003eFully divided pulse manifold design\u003c\/li\u003e\n\u003cli\u003ePre-drilled for pyrometer probes\u003c\/li\u003e\n\u003cli\u003eHigh-silicon ductile iron\u003c\/li\u003e\n\u003cli\u003eDesigned to withstand extreme temperatures and vibration\u003c\/li\u003e\n\u003cli\u003eGreat for stock and performance installations\u003c\/li\u003e\n\u003cli\u003eConnection joints allows for expansion and contraction\u003c\/li\u003e\n\u003cli\u003ePrevents cracking or exhaust leaks\u003c\/li\u003e\n\u003cli\u003eQuicker turbo spool up\u003c\/li\u003e\n\u003cli\u003eReduced back-pressure\u003c\/li\u003e\n\u003cli\u003eIncreased power\u003c\/li\u003e\n\u003cli\u003eKit includes stainless steel hardware\u003c\/li\u003e\n\u003cli\u003eGaskets are available separately\u003c\/li\u003e\n\u003cli\u003eReplaces Cummins # 3967995, 3943871 \u0026amp; 3943875\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWarranty\u003c\/h4\u003e\n\u003ch6 class=\"mb0 ml16\"\u003e\u003cstrong\u003eParts\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e36-Months\u003c\/li\u003e\n\u003cli\u003e75,000 Miles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv class=\"panel-heading\" role=\"tab\" id=\"headingFive\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2018-04-09T11:03:52-06:00","created_at":"2018-04-09T11:06:00-06:00","vendor":"BD Diesel","type":"","tags":[],"price":53295,"price_min":53295,"price_max":53295,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":7275855183935,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1045987","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"BD Diesel 1045987 Pulse Exhaust Manifold 03-07 Cummins","public_title":null,"options":["Default Title"],"price":53295,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/7d98951a0ce52df6ae71636db88b512e.JPG?v=1546221813"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/7d98951a0ce52df6ae71636db88b512e.JPG?v=1546221813","options":["Title"],"media":[{"alt":null,"id":2912096780351,"position":1,"preview_image":{"aspect_ratio":2.4,"height":175,"width":420,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/7d98951a0ce52df6ae71636db88b512e.JPG?v=1546221813"},"aspect_ratio":2.4,"height":175,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/7d98951a0ce52df6ae71636db88b512e.JPG?v=1546221813","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"collapseThree\" class=\"panel-collapse collapse in\" role=\"tabpanel\" aria-labelledby=\"headingThree\" aria-expanded=\"true\"\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cul\u003e\n\u003cli\u003eFully divided pulse manifold design\u003c\/li\u003e\n\u003cli\u003ePre-drilled for pyrometer probes\u003c\/li\u003e\n\u003cli\u003eHigh-silicon ductile iron\u003c\/li\u003e\n\u003cli\u003eDesigned to withstand extreme temperatures and vibration\u003c\/li\u003e\n\u003cli\u003eGreat for stock and performance installations\u003c\/li\u003e\n\u003cli\u003eConnection joints allows for expansion and contraction\u003c\/li\u003e\n\u003cli\u003ePrevents cracking or exhaust leaks\u003c\/li\u003e\n\u003cli\u003eQuicker turbo spool up\u003c\/li\u003e\n\u003cli\u003eReduced back-pressure\u003c\/li\u003e\n\u003cli\u003eIncreased power\u003c\/li\u003e\n\u003cli\u003eKit includes stainless steel hardware\u003c\/li\u003e\n\u003cli\u003eGaskets are available separately\u003c\/li\u003e\n\u003cli\u003eReplaces Cummins # 3967995, 3943871 \u0026amp; 3943875\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWarranty\u003c\/h4\u003e\n\u003ch6 class=\"mb0 ml16\"\u003e\u003cstrong\u003eParts\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e36-Months\u003c\/li\u003e\n\u003cli\u003e75,000 Miles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv class=\"panel-heading\" role=\"tab\" id=\"headingFive\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e"}
    BD Diesel 1045987 Pulse Exhaust Manifold 03-07 Cummins
    BD Diesel
    BD Diesel 1045987 Pulse Exhaust Manifold 03-07 Cummins
    $532.95
    {"id":572640657471,"title":"Diamond Eye 510220 5\" Muffler Delete Pipe, 30\" length - Universal","handle":"diamond-eye-510220-5-muffler-delete-pipe-30-length-universal","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eDiamond Eye Manufacturing is recognized as being one of the most modern and progressive companies in eastern Oregon. The company has invested heavily to incorporate several CNC mandrel bending machines and support equipment, Enabling us to produce the finest exhaust components in today's marketplace. Mandrel bending and fabrication parameters are extensive, and a variety of tooling allows us to offer tube processing from 3\/8\" to 5\"OD in both aluminized and stainless steel. Diamond Eye Manufacturing is located on a 23-acre complex and has immediate plans for expansion. Currently, the company utilizes over 60,000 sq. ft. for manufacturing components. Separate from the manufacturing facility, our Warehouse Distribution Center utilizes highly efficient shipping methods and a substantial amount of inventory to ensure rapid response times for delivering customer orders in a timely fashion. Our new state of the art Research and Development Center was established to keep pace with the ever changing automotive performance aftermarket. We have taken great care to outfit the facility with an array of testing equipment to provide our engineers with the information needed to design the best systems available. Many of the employees here at Diamond Eye Manufacturing have several years of experience within the industry. This wealth of knowledge and experience is tapped and transformed into results. Our promise to you is simply this, we will provide you with the highest level of customer service, quality parts, and best prices available to keep you competitive!\u003c\/span\u003e","published_at":"2018-03-26T13:33:53-06:00","created_at":"2018-03-26T13:35:44-06:00","vendor":"Diamone Eye","type":"","tags":[],"price":5884,"price_min":5884,"price_max":5884,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":7112691613759,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"510220","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Diamond Eye 510220 5\" Muffler Delete Pipe, 30\" length - Universal","public_title":null,"options":["Default Title"],"price":5884,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/8c5703784a4268780b27e654a3a4e64e.JPG?v=1522092949"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/8c5703784a4268780b27e654a3a4e64e.JPG?v=1522092949","options":["Title"],"media":[{"alt":null,"id":2877773709375,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/8c5703784a4268780b27e654a3a4e64e.JPG?v=1522092949"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/8c5703784a4268780b27e654a3a4e64e.JPG?v=1522092949","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eDiamond Eye Manufacturing is recognized as being one of the most modern and progressive companies in eastern Oregon. The company has invested heavily to incorporate several CNC mandrel bending machines and support equipment, Enabling us to produce the finest exhaust components in today's marketplace. Mandrel bending and fabrication parameters are extensive, and a variety of tooling allows us to offer tube processing from 3\/8\" to 5\"OD in both aluminized and stainless steel. Diamond Eye Manufacturing is located on a 23-acre complex and has immediate plans for expansion. Currently, the company utilizes over 60,000 sq. ft. for manufacturing components. Separate from the manufacturing facility, our Warehouse Distribution Center utilizes highly efficient shipping methods and a substantial amount of inventory to ensure rapid response times for delivering customer orders in a timely fashion. Our new state of the art Research and Development Center was established to keep pace with the ever changing automotive performance aftermarket. We have taken great care to outfit the facility with an array of testing equipment to provide our engineers with the information needed to design the best systems available. Many of the employees here at Diamond Eye Manufacturing have several years of experience within the industry. This wealth of knowledge and experience is tapped and transformed into results. Our promise to you is simply this, we will provide you with the highest level of customer service, quality parts, and best prices available to keep you competitive!\u003c\/span\u003e"}
    Diamond Eye 510220 5" Muffler Delete Pipe, 30" length - Universal
    Diamone Eye
    Diamond Eye 510220 5" Muffler Delete Pipe, 30" length - Universal
    $58.84
    {"id":539357773887,"title":"MBRP M91031 Stainless Muffler 4\" Inlet \/Outlet 24\" Body 30\" Overall - Universal","handle":"muffler-4-inlet-outlet-24-body-30-overall-t409","description":"\u003cp\u003eUniversal\u003c\/p\u003e","published_at":"2018-03-08T20:27:30-07:00","created_at":"2018-03-08T20:27:30-07:00","vendor":"Mbrp","type":"","tags":["mbrp"],"price":17499,"price_min":17499,"price_max":17499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":6950961283135,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"M91031","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"MBRP M91031 Stainless Muffler 4\" Inlet \/Outlet 24\" Body 30\" Overall - Universal","public_title":null,"options":["Default Title"],"price":17499,"weight":18,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/M91031.jpg?v=1546567843"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/M91031.jpg?v=1546567843","options":["Title"],"media":[{"alt":null,"id":2877749592127,"position":1,"preview_image":{"aspect_ratio":1.0,"height":300,"width":300,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/M91031.jpg?v=1546567843"},"aspect_ratio":1.0,"height":300,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/M91031.jpg?v=1546567843","width":300}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eUniversal\u003c\/p\u003e"}
    MBRP M91031 Stainless Muffler 4" Inlet /Outlet  24" Body  30" Overall - Universal
    Mbrp
    MBRP M91031 Stainless Muffler 4" Inlet /Outlet 24" Body 30" Overall - Universal
    $174.99
    {"id":610937241663,"title":"Diamond Eye K5222A-RP 5\" Turbo Back Exhaust (NO Muffler) 03-04 Cummins","handle":"diamond-eye-k5222a-rp-5-turbo-back-exhaust-no-muffler-03-04-cummins","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eDiamond Eye Manufacturing is recognized as being one of the most modern and progressive companies in eastern Oregon. The company has invested heavily to incorporate several CNC mandrel bending machines and support equipment, Enabling us to produce the finest exhaust components in today's marketplace. Mandrel bending and fabrication parameters are extensive, and a variety of tooling allows us to offer tube processing from 3\/8\" to 5\"OD in both aluminized and stainless steel. Diamond Eye Manufacturing is located on a 23-acre complex and has immediate plans for expansion. Currently, the company utilizes over 60,000 sq. ft. for manufacturing components. Separate from the manufacturing facility, our Warehouse Distribution Center utilizes highly efficient shipping methods and a substantial amount of inventory to ensure rapid response times for delivering customer orders in a timely fashion. Our new state of the art Research and Development Center was established to keep pace with the ever changing automotive performance aftermarket. We have taken great care to outfit the facility with an array of testing equipment to provide our engineers with the information needed to design the best systems available. Many of the employees here at Diamond Eye Manufacturing have several years of experience within the industry. This wealth of knowledge and experience is tapped and transformed into results. Our promise to you is simply this, we will provide you with the highest level of customer service, quality parts, and best prices available to keep you competitive!\u003c\/span\u003e","published_at":"2018-04-09T10:57:40-06:00","created_at":"2018-04-09T10:59:54-06:00","vendor":"Diamone Eye","type":"","tags":[],"price":49836,"price_min":49836,"price_max":49836,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":7275824939071,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"K5222A-RP","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Diamond Eye K5222A-RP 5\" Turbo Back Exhaust (NO Muffler) 03-04 Cummins","public_title":null,"options":["Default Title"],"price":49836,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/3dc2df4da619b9a665f742ee89c91982.JPG?v=1523293196"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/3dc2df4da619b9a665f742ee89c91982.JPG?v=1523293196","options":["Title"],"media":[{"alt":null,"id":2912091603007,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/3dc2df4da619b9a665f742ee89c91982.JPG?v=1523293196"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/3dc2df4da619b9a665f742ee89c91982.JPG?v=1523293196","width":420}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eDiamond Eye Manufacturing is recognized as being one of the most modern and progressive companies in eastern Oregon. The company has invested heavily to incorporate several CNC mandrel bending machines and support equipment, Enabling us to produce the finest exhaust components in today's marketplace. Mandrel bending and fabrication parameters are extensive, and a variety of tooling allows us to offer tube processing from 3\/8\" to 5\"OD in both aluminized and stainless steel. Diamond Eye Manufacturing is located on a 23-acre complex and has immediate plans for expansion. Currently, the company utilizes over 60,000 sq. ft. for manufacturing components. Separate from the manufacturing facility, our Warehouse Distribution Center utilizes highly efficient shipping methods and a substantial amount of inventory to ensure rapid response times for delivering customer orders in a timely fashion. Our new state of the art Research and Development Center was established to keep pace with the ever changing automotive performance aftermarket. We have taken great care to outfit the facility with an array of testing equipment to provide our engineers with the information needed to design the best systems available. Many of the employees here at Diamond Eye Manufacturing have several years of experience within the industry. This wealth of knowledge and experience is tapped and transformed into results. Our promise to you is simply this, we will provide you with the highest level of customer service, quality parts, and best prices available to keep you competitive!\u003c\/span\u003e"}
    Diamond Eye K5222A-RP 5" Turbo Back Exhaust (NO Muffler) 03-04 Cummins
    Diamone Eye
    Diamond Eye K5222A-RP 5" Turbo Back Exhaust (NO Muffler) 03-04 Cummins
    $498.36
    {"id":572587606079,"title":"MBRP MDA30 4\" Aluminized Muffler Delete Pipe (30\" length) - Universal","handle":"mbrp-mda30-4-aluminized-muffler-delete-pipe-universal","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e4\" Single System Muffler Delete Pipe\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e30\" Overall\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eUniversal Fit\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThere are always those purists who push the envelope in their pursuit of maximum performance. It is for these true enthusiasts that we build what is one of the most extensive line-ups of muffler deletes in the industry. Extreme performance and extreme sound can be yours.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eConstructed from heavy duty aluminized steel you can count on this pipe lasting for years to come.\u003c\/span\u003e","published_at":"2018-03-26T12:30:26-06:00","created_at":"2018-03-26T12:31:50-06:00","vendor":"Mbrp","type":"","tags":["mbrp"],"price":5999,"price_min":5999,"price_max":5999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":7112339619903,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MDA30","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"MBRP MDA30 4\" Aluminized Muffler Delete Pipe (30\" length) - Universal","public_title":null,"options":["Default Title"],"price":5999,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/MDA30.jpg?v=1522089111"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/MDA30.jpg?v=1522089111","options":["Title"],"media":[{"alt":null,"id":2877640540223,"position":1,"preview_image":{"aspect_ratio":1.0,"height":300,"width":300,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/MDA30.jpg?v=1522089111"},"aspect_ratio":1.0,"height":300,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0004\/1667\/7951\/products\/MDA30.jpg?v=1522089111","width":300}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e4\" Single System Muffler Delete Pipe\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e30\" Overall\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eUniversal Fit\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThere are always those purists who push the envelope in their pursuit of maximum performance. It is for these true enthusiasts that we build what is one of the most extensive line-ups of muffler deletes in the industry. Extreme performance and extreme sound can be yours.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eConstructed from heavy duty aluminized steel you can count on this pipe lasting for years to come.\u003c\/span\u003e"}
    MBRP MDA30 4" Aluminized Muffler Delete Pipe (30" length) - Universal
    Mbrp
    MBRP MDA30 4" Aluminized Muffler Delete Pipe (30" length) - Universal
    $59.99
    Severance, CO
    970-817-4993 Mon-Sun 7:00am - 9:00pm MT
    destructivediesel@gmail.com
    JOIN US:
    • Social
    • Social
    INFORMATION
    • Search
    SUBSCRIBE AND GET 5% OFF DISCOUNT

    Subscribe to our Newsletter and get bonuses for the next purchase

    WE ACCEPT:

    © 2022 Destructive Diesel Performance LLC by Arenatheme. All Rights Reserved

      Sample Product

      • Twitter
      • Facebook
      • Google+